Cutting Oil Additives Manufacturer,Supplier,Exporter in Mumbai,India

Cutting Oil Additives

Product Code : 17

Product Description

Metal Cutting Oil Additives

Being a trustworthy manufacturer and supplier of Cutting Oil Additives. It is a dark colored shading, napthenic or paraffinic oil dissolvable, an excellent, cutting oil added substance. This is a genuine engineered metalworking coolant able to do effectively taking care of most crushing, sawing, turning, drilling, processing and boring operations. Cutting Oil Additives structures a stable translucent arrangement over an extensive variety of water hardness and temperatures. The offered range is known for clearness enormously that, improves device perceivability. Also, this novel equation is non-destructive to steel, cast press, metal, copper, aluminum and carbide tooling.

Features:

It leaves a light, slick, film that gives here and now indoor rust insurance and, dissimilar to other engineered coolants, decreases the issue of staying on machine ways and slides.
It contains lubricity, defoaming and erosion preventive added substances.
The most recent and best bacterial insurance is given to avert rancidity.
Its emulsifier blends promptly with water to shape stable emulsions and has best rust-precaution properties. It is hindered against frothing.
This item is reasonable for an extensive variety of metal cutting and granulating operations.
It will viably expel warm from the work piece and can be connected as a stream, or in fog frame.

Formulations

16 to 20% by weight
In either napthenic or paraffinic base oils. Satisfactory emulsions can be formulated at 5:1 to 100:1 water to oil ratio Meeting the requirements of Soluble Cutting Oil, IS : 1115.

Preparation of Soluble Oils

To accomplish a steady emulsion, dependably add oil to water - never add water to oil. For best emulsion steadiness and security against rust and bacterial development, utilize deionized or low hardness water ( < 450ppm). Start by blending one section oil into four sections water. Next, add water to this blend to achieve the coveted weakening. The oil-water proportion may change contingent on operations.

Handling & Storage

Cutting Oil Additive is a Cutting Oil Additive and is ordinarily taken care of at room temperature. For general purposes, the accompanying stockpiling and taking care of temperatures are suggested: Storage Handling 50-70Â°C (122-158Â°F). For more broad data on the protected taking care of and utilization of this item, see the Material Safety Data Sheet.

Packing Unit

20 kg carboys
200 kg drums

Specification :

TEST	METHOD	MIN	MAX	VALUE
Appearance	Visual		Clear & Bright	Clear & Bright
Specific Gravity @ 15.6^oC	ASTM D 1298	0.94	1.15	0.963
Water content , % wt	ASTM D 95		10	5.1
Viscosity @ 40^oC, cSt.	ASTM D 445	200		315
Flash Point, ^oC (COC)	ASTM D 92	150		155
Ash Content, mass %	ASTM D 482		7.0	3.1
Pour Point, ^oC	ASTM D 97		-6	-5
Emulsion Test, 5:1 And 20:1 Ratio in Water of 400 PPM Hardness	IS:1448 P:98
Oil layer			0.1	No Separation
Cream layer			0.2	No Separation
Froth Test, 5:1 And 20:1 Ratio in Water of 200 PPM Hardness	IS:1448 P:99	No Froth After 15 Mins		PASS
Cast Iron Corrosion Test, 20:1 Ratio Emulsion With 400 PPM Hard Water	IP125		PASS	PASS
Copper Strip corrosion Test @ 100Â°C For 3 Hrs	IS:1448 P:15		1	1
Thermal Stability Test	IS:1448 P:100		PASS	PASS